Testing Dictionary
Written on 10:34 PM by MURALI KRISHNA
Testing Dictionary
Acceptance Testing
Formal testing conducted to enable a user, customer, or other authorized entity to determine whether to accept a system or component.
Actual Outcome
The behaviour actually produced when the object is tested under specified conditions.
Adding Value
Adding something that the customer wants that was not there before.
Ad hoc Testing
Testing carried out using no recognized test case design technique.
Alpha Testing
Simulated or actual operational testing at an in-house site not otherwise involved with the software developers.
Arc Testing
A test case design technique for a component in which test cases are designed to execute branch outcomes.
Backus-Naur Form
A metalanguage used to formally describe the syntax of a language.
Basic Block
A sequence of one or more consecutive, executable statements containing no branches.
Basis Test Set
A set of test cases derived from the code logic, which ensure that 100% branch coverage is achieved.
Bebugging
The process of intentionally adding known faults to those already in a computer program for the purpose of monitoring the rate of detection and removal, and estimating the number of faults remaining in the program.
Behaviour
The combination of input values and preconditions and the required response for a function of a system. The full specification of a function would normally comprise one or more behaviours.
Benchmarking
Comparing your product to the best competitors'.
Beta Testing
Operational testing at a site not otherwise involved with the software developers.
Big-bang Testing
Integration testing where no incremental testing takes place prior to all the system's components being combined to form the system.
Black Box Testing
Test case selection that is based on an analysis of the specification of the component without reference to its internal workings. Testing by looking only at the inputs and outputs, not at the insides of a program.
Sometimes also called "Requirements Based Testing". You don't need to be a programmer, you only need to know what the program is supposed to do and be able to tell whether an output is correct or not.
Bottom-up Testing
An approach to testing where the lowest level components are tested first, then used to facilitate the testing of higher level components. The process is repeated until the component at the top of the hierarchy is tested.
Boundary Value
An input value or output value which is on the boundary between equivalence classes, or an incremental distance either side of the boundary.
Boundary Value Analysis
A test case design technique for a component in which test cases are designed which include representatives of boundary values.
Boundary Value Coverage
The percentage of boundary values of the component's equivalence classes, which have been exercised by a test case suite.
Boundary Value Testing
A test case design technique for a component in which test cases are designed which include representatives of boundary values.
Boundary Value Coverage
The percentage of boundary values of the component's equivalence classes, which have been exercised by a test case suite.
Boundary Value Testing
A test case design technique for a component in which test cases are designed which include representatives of boundary values.
Branch
A conditional transfer of control from any statement to any other statement in a component, or an unconditional transfer of control from any statement to any other statement in the component except the next statement, or when a component has more than one entry point, a transfer of control to an entry point of the component.
Branch Condition
A condition within a decision.
Branch Condition Combination Coverage
The percentage of combinations of all branch condition outcomes in every decision that have been exercised by a test case suite.
Branch Condition Combination Testing
A test case design technique in which test cases are designed to execute combinations of branch condition outcomes.
Branch Condition Coverage
The percentage of branch condition outcomes in every decision that have been exercised by a test case suite.
Branch Condition Testing
A test case design technique in which test cases are designed to execute branch condition outcomes.
Branch Coverage
The percentage of branches that have been exercised by a test case suite.
Branch Outcome
The result of a decision (which therefore determines the control flow alternative taken).
Branch Point
A program point at which the control flow has two or more alternative routes.
Branch Testing
A test case design technique for a component in which test cases are designed to execute branch outcomes.
Bring to the Table
Refers to what each individual in a meeting can contribute to a meeting, for example, a design or brainstorming meetings.
Bug
A manifestation of an error in software. A fault, if encountered may cause a failure.
Bug Seeding
The process of intentionally adding known faults to those already in a computer program for the purpose of monitoring the rate of detection and removal, and estimating the number of faults remaining in the program.
C-use
A data use not in a condition.
Capture/Playback Tool
A test tool that records test input as it is sent to the software under test. The input cases stored can then be used to reproduce the test at a later time.
Capture/Replay Tool
A test tool that records test input as it is sent to the software under test. The input cases stored can then be used to reproduce the test at a later time.
CAST
Acronym for computer-aided software testing.
Cause-effect Graph
A graphical representation of inputs or stimuli (causes) with their associated outputs (effects), which can be used to design test cases.
Cause-effect Graphing
A test case design technique in which test cases are designed by consideration of cause-effect graphs.
Certification
The process of confirming that a system or component complies with its specified requirements and is acceptable for operational use.
Chow's Coverage Metrics
The percentage of sequences of N-transitions that have been exercised by a test case suite.
Code Coverage
An analysis method that determines which parts of the software have been executed (covered) by the test case suite and which parts have not been executed and therefore may require additional attention.
If we have a set of tests that gives Code Coverage, it simply means that, if you run all the tests, every line of the code is executed at least once by some test.
Code-based Testing
Designing tests based on objectives derived from the implementation (e.g., tests that execute specific control flow paths or use specific data items).
Compatibility Testing
Testing whether the system is compatible with other systems with which it should communicate.
Complete Path Testing
A test case design technique in which the test case suite comprises all combinations of input values and preconditions for component variables.
Component
A minimal software item for which a separate specification is available.
Component Testing
The testing of individual software components.
Computation Data Use
A data use not in a condition. Also called C-use.
Concurrent (or Simultaneous) Engineering
Integrating the design, manufacturing, and test processes.
Condition
A Boolean expression containing no Boolean operators. For instance, A < B is a condition but A and B is not.
Condition Coverage
The percentage of branch condition outcomes in every decision that have been exercised by a test case suite.
Condition Outcome
The evaluation of a condition to TRUE or FALSE.
Conformance Criterion
Some method of judging whether or not the component's action on a particular specified input value conforms to the specification.
Conformance Testing
The process of testing that an implementation conforms to the specification on which it is based.
Continuous Improvement
The PDSA process of iteration which results in improving a product.
Control Flow
An abstract representation of all possible sequences of events in a program's execution.
Control Flow Graph
The diagrammatic representation of the possible alternative control flow paths through a component.
Control Flow Path
A sequence of executable statements of a component, from an entry point to an exit point.
Conversion Testing
Testing of programs or procedures used to convert data from existing systems for use in replacement systems.
Correctness
The degree to which software conforms to its specification.
Coverage
The degree, expressed as a percentage, to which a specified coverage item has been exercised by a test case suite.
A measure applied to a set of tests. The most important are called Code Coverage and Path Coverage. There are a number of intermediate types of coverage defined, moving up the ladder from Code Coverage (weak) to Path Coverage (strong, but hard to get). These definitions are called things like Decision -Condition Coverage, but they're seldom important in the real world. For the curious, they are covered in detail in Glenford Myers' book, The Art of Software Testing.
Coverage Item
An entity or property used as a basis for testing.
Customer Satisfaction
Meeting or exceeding a customer's expectations for a product or service.
Data Coupling
Data coupling is where one piece of code interacts with another by modifying a data object that the other code reads. Data coupling is normal in computer operations, where data is repeatedly modified until the desired result is obtained. However, unintentional data coupling is bad. It causes many hard to find bugs, and it causes all "side effect" bugs caused by changing existing systems. It's the reason why you need to test all paths to do really tight testing. The best way to combat it is with Regression Testing, to make sure that a change didn't break something else.
Data Definition
An executable statement where a variable is assigned a value.
Data Definition C-use Coverage
The percentage of data definition C-use pairs in a component that are exercised by a test case suite.
Data Definition C-use Pair
A data definition and computation data use, where the data use uses the value defined in the data definition.
Data Definition P-use Coverage
The percentage of data definition P-use pairs in a component that are exercised by a test case suite.
Data Definition P-use Pair
A data definition and predicate data use, where the data use uses the value defined in the data definition.
Data Definition-use Coverage
The percentage of data definition-use pairs in a component that are exercised by a test case suite.
Data Definition-use Pair
A data definition and data use , where the data use uses the value defined in the data definition.
Data Definition-use Testing
A test case design technique for a component in which test cases are designed to execute data definition-use pairs.
Data Flow Coverage
Test coverage measure based on variable usage within the code. Examples are data definition-use coverage, data definition P-use coverage, data definition C-use coverage, etc.
Data Flow Testing
Testing in which test cases are designed based on variable usage within the code.
Data Use
An executable statement where the value of a variable is accessed.
Debugging
The process of finding and removing the causes of failures in software.
Decision
A program point at which the control flow has two or more alternative routes.
Decision Condition
A condition within a decision.
Decision Coverage
The percentage of decision outcomes that have been exercised by a test case suite.
Decision Outcome
The result of a decision (which therefore determines the control flow alternative taken).
Design
The creation of a specification from concepts.
Design-based Testing
Designing tests based on objectives derived from the architectural or detail design of the software (e.g., tests that execute specific invocation paths or probe the worst case behaviour of algorithms).
Desk Checking
The testing of software by the manual simulation of its execution.
Dirty Testing
Testing aimed at showing software does not work.
Documentation Testing
Testing concerned with the accuracy of documentation.
Domain
The set from which values are selected.
Domain Testing
A test case design technique for a component in which test cases are designed to execute representatives from equivalence classes.
Dynamic Analysis
The process of evaluating a system or component based upon its behaviour during execution.
Driver
A throwaway little module that calls something we need to test, because the real guy who'll be calling it isn't available.
For example, suppose module A needs module X to fire it up.
X isn't here yet, so we use a stub:
Emulator
A device, computer program, or system that accepts the same inputs and produces the same outputs as a given system.
Entry Point
The first executable statement within a component.
Equivalence Class
A portion of the component's input or output domains for which the component's behaviour is assumed to be the same from the component's specification.
An Equivalence Class (EC) of input values is a group of values that all cause the same sequence of operations to occur.
In Black Box terms, they are all treated the same way according to the specs. Different input values within an Equivalence Class may give different answers, but the answers are produced by the same procedure.
In Glass Box terms, they all cause execution to go down the same path.
Equivalence Partition
A portion of the component's input or output domains for which the component's behaviour is assumed to be the same from the component's specification.
Equivalence Partition Coverage
The percentage of equivalence classes generated for the component, which have been exercised by a test case suite.
Equivalence Partition Testing
A test case design technique for a component in which test cases are designed to execute representatives from equivalence classes.
Error
A human action that produces an incorrect result.
Error Guessing
A test case design technique where the experience of the tester is used to postulate what faults might occur, and to design tests specifically to expose them.
Error Seeding
The process of intentionally adding known faults to those already in a computer program for the purpose of monitoring the rate of detection and removal, and estimating the number of faults remaining in the program.
Executable Statement
A statement which, when compiled, is translated into object code, which will be executed procedurally when the program is running and may perform an action on program data.
Exercised
A program element is exercised by a test case when the input value causes the execution of that element, such as a statement, branch, or other structural element.
Exhaustive Testing
A test case design technique in which the test case suite comprises all combinations of input values and preconditions for component variables.
Exit Point
The last executable statement within a component.
Facility Testing
Test case selection that is based on an analysis of the specification of the component without reference to its internal workings.
Failure
Deviation of the software from its expected delivery or service.
Fault
A manifestation of an error in software. A fault, if encountered may cause a failure.
Feasible Path
A path for which there exists a set of input values and execution conditions, which causes it to be executed.
Feature Testing
Test case selection that is based on an analysis of the specification of the component without reference to its internal workings.
Flow Charting
Creating a 'map' of the steps in a process.
Functional Chunk
The fundamental unit of testing.
Its precise definition is "The smallest piece of code for which all the inputs and outputs are meaningful at the spec level." This means that we can test it Black Box, and design the tests before the code arrives without regard to how it was coded, and also tell whether the results it gives are correct.
Functional Specification
The document that describes in detail the characteristics of the product with regard to its intended capability.
Functional Test Case Design
Test case selection that is based on an analysis of the specification of the component without reference to its internal workings.
Glass Box Testing
Test case selection that is based on an analysis of the internal structure of the component.
Testing by looking only at the code.
Sometimes also called "Code Based Testing".
Obviously you need to be a programmer and you need to have the source code to do this.
Incremental Integration
A systematic way for putting the pieces of a system together one at a time, testing as each piece is added. We not only test that the new piece works, but we also test that it didn't break something else by running the RTS (Regression Test Set).
Incremental Testing
Integration testing where system components are integrated into the system one at a time until the entire system is integrated.
Independence
Separation of responsibilities, which ensures the accomplishment of objective evaluation.
Infeasible Path
A path, which cannot be exercised by any set of possible input values.
Input
A variable (whether stored within a component or outside it) that is read by the component.
Input Domain
The set of all possible inputs.
Input Value
An instance of an input.
Inspection
A group review quality improvement process for written material. It consists of two aspects; product (document itself) improvement and process improvement (of both document production and inspection).
Installability Testing
Testing concerned with the installation procedures for the system.
Instrumentation
The insertion of additional code into the program in order to collect information about program behaviour during program execution.
Instrumenter
A software tool used to carry out instrumentation.
Integration
The process of combining components into larger assemblies.
Integration Testing
Testing performed to expose faults in the interfaces and in the interaction between integrated components.
Interface Testing
Integration testing where the interfaces between system components are tested.
Isolation Testing
Component testing of individual components in isolation from surrounding components, with surrounding components being simulated by stubs.
LCSAJ
A Linear Code Sequence And Jump, consisting of the following three items (conventionally identified by line numbers in a source code listing): the start of the linear sequence of executable statements, the end of the linear sequence, and the target line to which control flow is transferred at the end of the linear sequence.
LCSAJ Coverage
The percentage of LCSAJs of a component, which are exercised by a test case suite.
LCSAJ Testing
A test case design technique for a component in which test cases are designed to execute LCSAJs.
Logic-coverage Testing
Test case selection that is based on an analysis of the internal structure of the component.
Logic-driven Testing
Test case selection that is based on an analysis of the internal structure of the component.
Maintainability Testing
Testing whether the system meets its specified objectives for maintainability.
Manufacturing
Creating a product from specifications.
Metrics
Ways to measure: e.g., time, cost, customer satisfaction, quality.
Modified Condition/Decision Coverage
The percentage of all branch condition outcomes that independently affect a decision outcome that have been exercised by a test case suite.
Modified Condition/Decision Testing
A test case design technique in which test cases are designed to execute branch condition outcomes that independently affect a decision outcome.
Multiple Condition Coverage
The percentage of combinations of all branch condition outcomes in every decision that have been exercised by a test case suite.
Mutation Analysis
A method to determine test case suite thoroughness by measuring the extent to which a test case suite can discriminate the program from slight variants (mutants) of the program. See also The process of intentionally adding known faults to those already in a computer program for the purpose of monitoring the rate of detection and removal, and estimating the number of faults remaining in the program.
N-switch Coverage
The percentage of sequences of N-transitions that have been exercised by a test case suite.
N-switch Testing
A form of state transition testing in which test cases are designed to execute all valid sequences of N-transitions.
N-transitions
A sequence of N+1 transitions.
Negative Testing
Testing aimed at showing software does not work.
Non-functional Requirements Testing
Testing of those requirements that do not relate to functionality. i.e. performance, usability, etc.
Operational Testing
Testing conducted to evaluate a system or component in its operational environment.
Oracle
A mechanism to produce the predicted outcomes to compare with the actual outcomes of the software under test.
Outcome
Actual outcome or predicted outcome. This is the outcome of a test.
Output
A variable (whether stored within a component or outside it) that is written to by the component.
Output Domain
The set of all possible outputs.
Output Value
An instance of an output.
P-use
A data use in a predicate.
Partition Testing
A test case design technique for a component in which test cases are designed to execute representatives from equivalence classes.
Path
A sequence of executable statements of a component, from an entry point to an exit point.
Path Coverage
The percentage of paths in a component exercised by a test case suite.
A set of tests that gives Path Coverage for some code if the set goes down each path at least once.
The difference between this and Code Coverage is that Path Coverage means not just "visiting" a line of code, but also includes how you got there and where you're going next. It therefore uncovers more bugs, especially those caused by Data Coupling.
However, it's impossible to get this level of coverage except perhaps for a tiny critical piece of code.
Path Sensitizing
Choosing a set of input values to force the execution of a component to take a given path.
Path Testing
A test case design technique in which test cases are designed to execute paths of a component.
Performance Testing
Testing conducted to evaluate the compliance of a system or component with specified performance requirements.
Portability Testing
Testing aimed at demonstrating the software can be ported to specified hardware or software platforms.
Precondition
Environmental and state conditions which must be fulfilled before the component can be executed with a particular input value.
Predicate
A logical expression, which evaluates to TRUE or FALSE, normally to direct the execution path in code.
Predicate Data Use
A data use in a predicate.
Predicted Outcome
The behaviour predicted by the specification of an object under specified conditions.
Process
What is actually done to create a product.
Program Instrumenter
A software tool used to carry out instrumentation.
Progressive Testing
Testing of new features after regression testing of previous features.
Pseudo-random
A series which appears to be random but is in fact generated according to some prearranged sequence.
Quality Tools
Tools used to measure and observe every aspect of the creation of a product.
Recovery Testing
Testing aimed at verifying the system's ability to recover from varying degrees of failure.
Regression Testing
Retesting of a previously tested program following modification to ensure that faults have not been introduced or uncovered as a result of the changes made.
Re-running a set of tests that used to work to make sure that changes to the system didn't break anything. It's usually run after each set of maintenance or enhancement changes, but is also very useful for Incremental Integration of a system.
RTS (Regression Test Set)
The set of tests used for Regression Testing. It should be complete enough so that the system is defined to "work correctly" when this set of tests runs without error.
Requirements-based Testing
Designing tests based on objectives derived from requirements for the software component (e.g., tests that exercise specific functions or probe the non-functional constraints such as performance or security).
Result
Actual outcome or predicted outcome. This is the outcome of a test.
Review
A process or meeting during which a work product, or set of work products, is presented to project personnel, managers, users or other interested parties for comment or approval.
Security Testing
Testing whether the system meets its specified security objectives.
Serviceability Testing
Testing whether the system meets its specified objectives for maintainability.
Simple Subpath
A subpath of the control flow graph in which no program part is executed more than necessary.
Simulation
The representation of selected behavioural characteristics of one physical or abstract system by another system.
Simulator
A device, computer program or system used during software verification, which behaves or operates like a given system when provided with a set of controlled inputs.
Six-Sigma Quality
Meaning 99.999997% perfect; only 3.4 defects in a million.
Source Statement
An entity in a programming language, which is typically the smallest indivisible unit of execution.
SPC
Statistical process control; used for measuring the conformance
of a product to specifications.
Specification
A description of a component's function in terms of its output values for specified input values under specified preconditions.
Specified Input
An input for which the specification predicts an outcome.
State Transition
A transition between two allowable states of a system or component.
State Transition Testing
A test case design technique in which test cases are designed to execute state transitions.
Statement
An entity in a programming language, which is typically the smallest indivisible unit of execution.
Statement Coverage
The percentage of executable statements in a component that have been exercised by a test case suite.
Statement Testing
A test case design technique for a component in which test cases are designed to execute statements.
Static Analysis
Analysis of a program carried out without executing the program.
Static Analyzer
A tool that carries out static analysis.
Static Testing
Testing of an object without execution on a computer.
Statistical Testing
A test case design technique in which a model is used of the statistical distribution of the input to construct representative test cases.
Storage Testing
Testing whether the system meets its specified storage objectives.
Stress Testing
Testing conducted to evaluate a system or component at or beyond the limits of its specified requirements.
Structural Coverage
Coverage measures based on the internal structure of the component.
Structural Test Case Design
Test case selection that is based on an analysis of the internal structure of the component.
Structural Testing
Test case selection that is based on an analysis of the internal structure of the component.
Structured Basis Testing
A test case design technique in which test cases are derived from the code logic to achieve 100% branch coverage.
Structured Walkthrough
A review of requirements, designs or code characterized by the author of the object under review guiding the progression of the review.
Stub
A skeletal or special-purpose implementation of a software module, used to develop or test a component that calls or is otherwise dependent on it. A little throwaway module that can be called to make another module work (and hence be testable).
For example, if we want to test module A but it needs to call module B, which isn't available, we can use a quick little stub for B. It just answers "hello from b" or something similar; if asked to return a number it always returns the same number - like 100.
Subpath
A sequence of executable statements within a component.
Symbolic Evaluation
A static analysis technique that derives a symbolic expression for program paths.
Syntax Testing
A test case design technique for a component or system in which test case design is based upon the syntax of the input.
System Testing
The process of testing an integrated system to verify that it meets specified requirements.
Technical Requirements Testing
Testing of those requirements that do not relate to functionality. i.e. performance, usability, etc.
Test
Testing the product for defects.
Test Automation
The use of software to control the execution of tests, the comparison of actual outcomes to predicted outcomes, the setting up of test preconditions, and other test control and test reporting functions.
Test Case
A set of inputs, execution preconditions, and expected outcomes developed for a particular objective, such as to exercise a particular program path or to verify compliance with a specific requirement.
Test Case Design Technique
A method used to derive or select test cases.
Test Case Suite
A collection of one or more test cases for the software under test.
Test Comparator
A test tool that compares the actual outputs produced by the software under test with the expected outputs for that test case.
Test Completion Criterion
A criterion for determining when planned testing is complete, defined in terms of a test measurement technique.
Test Coverage
The degree, expressed as a percentage, to which a specified coverage item has been exercised by a test case suite.
Test Driver
A program or test tool used to execute software against a test case suite.
Test Environment
A description of the hardware and software environment in which the tests will be run, and any other software with which the software under test interacts when under test including stubs and test drivers.
Test Execution
The processing of a test case suite by the software under test, producing an outcome.
Test Execution Technique
The method used to perform the actual test execution, e.g. manual, capture/playback tool, etc.
Test Generator
A program that generates test cases in accordance to a specified strategy or heuristic.
Test Harness
A testing tool that comprises a test driver and a test comparator.
Test Measurement Technique
A method used to measure test coverage items.
Test Outcome
Actual outcome or predicted outcome. This is the outcome of a test. The result of a decision (which therefore determines the control flow alternative taken). The evaluation of a condition to TRUE or FALSE.
Test Plan
A record of the test planning process detailing the degree of tester independence, the test environment, the test case design techniques and test measurement techniques to be used, and the rationale for their choice.
Test Procedure
A document providing detailed instructions for the execution of one or more test cases.
Test Records
For each test, an unambiguous record of the identities and versions of the component under test, the test specification, and actual outcome.
Test Script
Commonly used to refer to the automated test procedure used with a test harness.
Test Specification
For each test case, the coverage item, the initial state of the software under test, the input, and the predicted outcome.
Test Target
A set of test completion criteria.
Testing
The process of exercising software to verify that it satisfies specified requirements and to detect errors.
Thread Testing
A variation of top-down testing where the progressive integration of components follows the implementation of subsets of the requirements, as opposed to the integration of components by successively lower levels.
Top-down Testing
An approach to integration testing where the component at the top of the component hierarchy is tested first, with lower level components being simulated by stubs. Tested components are then used to test lower level components. The process is repeated until the lowest level components have been tested.
Total Quality Control (TQM)
Controlling everything about a process.
Unit Testing
The testing of individual software components.
A Unit, as we use it in these techniques, is a very small piece of code with only a few inputs and outputs. The key thing is that these inputs and outputs may be implementation details (counters, array indices, pointers) and are not necessarily real world objects that are described in the specs. If all the inputs and outputs are real-world things, then we have a special kind of Unit, the Functional Chunk, which is ideal for testing. Most ordinary Units are tested by the programmer who wrote them, although a much better practice to have them subsequently tested by a different programmer.
Caution: There is no agreement out there about what a "unit" or "module" or subsystem" etc. really is. I've heard 50,000 line COBOL programs described as "units". So the Unit defined here is, in fact, a definition.
Usability Testing
Testing the ease with which users can learn and use a product.
Validation
Determination of the correctness of the products of software development with respect to the user needs and requirements.
Verification
The process of evaluating a system or component to determine whether the products of the given development phase satisfy the conditions imposed at the start of that phase.
Volume Testing
Testing where the system is subjected to large volumes of data.
Walkthrough
A review of requirements, designs or code characterized by the author of the object under review guiding the progression of the review.
White Box Testing
Test case selection that is based on an analysis of the internal structure of the component.